A wide range of materials for every industry application.
Discover 3D printing materials engineered for strength, precision, and performance, ranging from metals and polymers to composites and resins, built to serve the needs of all industries.
Get Your PDF Instantly
Enter your email to receive the PDF directly in your inbox.
Let's connect
Frequently Asked Questions
Most 3D printing materials have a shelf life of 12 to 36 months, depending on the material type and storage conditions. Always refer to the manufacturer’s datasheet for exact timelines.
Materials should be stored in a cool, dry environment away from sunlight. Some materials, like nylon and resins, require sealed containers with desiccants.
Yes, most standard materials such as Filaments, Resins, PA12, and stainless steel are available in stock. Specialty or industrial-grade materials may require lead time of 1–3 weeks.
MOQ varies by material type—usually 1 kg for filaments, 1L for resins, 5–10 kg for powders, and 1 cartridge for PolyJet or binder systems.
Filaments are vacuum-sealed with desiccants; powders come in sealed drums or metal jars; resins are packed in opaque bottles; and cartridges are sealed with smart chips for traceability.
Some materials like SLS nylon powders and support structures can be partially reused. However, performance degrades with cycles, so blending with virgin material is often required.
Print quality depends on material age, moisture content, particle size (in powders), storage conditions, printer compatibility, and print parameter tuning.
Yes, biocompatible resins (for dental and medical use), food-safe filaments, and FDA-approved materials are available for regulated applications. Certification should be verified with suppliers.
Yes. SLA uses photopolymer resins, FDM uses thermoplastic filaments, SLS and DMLS use powders, and PolyJet uses jettable photopolymers in sealed cartridges.
Material selection depends on factors like mechanical strength, flexibility, heat resistance, biocompatibility, surface finish, and end-use environment. A consultation is recommended for complex needs.
Yes. Materials like nylon, PVA, TPU, and resins are sensitive to moisture and require dry storage. Elevated humidity can lead to print defects and material degradation.
Not always. While some materials are cross-compatible, many machines require proprietary materials for optimal performance, warranty compliance, or software locking.
Standard sizes include: 1kg/2kg for filaments, 1L/5L for resins, 10kg/20kg for powders, and 1L+ cartridges for PolyJet and binder systems. Industrial orders can exceed 100 kg.
Yes. Metal powders, reactive resins, and binders may require gloves, respirators, or eye protection during handling. Always follow the safety data sheets (SDS).
